[WBEL-users] Very slow network
Vincent.Raffensberger@dtn.com
Vincent.Raffensberger@dtn.com
Fri, 18 Jun 2004 10:38:14 -0500
I've had similar issues with these cards in the past too. I'm not sure
about kudzu, as I've never used it.
As long as you specify the card setup in modules.conf, you shouldn't have
any trouble.
Here's how I do it:
alias eth0 3c59x
alias eth1 3c59x
alias eth2 3c59x
options 3c59x max_interrupt_work=96 rx_copybreak=384 options=4,4,0
full_duplex=1,1,0
# References:
# 3c59x media_type (options=):
# ( 0=10baseT; 4=100base-TX; 7=EEPROM default; 8=Autonegotiate )
James Knowles <jamesk@ifm-services.com>
Sent by: whitebox-users-admin@beau.org
06/17/2004 02:30 PM
To
whitebox-users@beau.org
cc
Subject
Re: [WBEL-users] Very slow network
Thank you everbody for the info. I didn't notice the previous message
about the B.
Disabling kudzu did the trick.
_______________________________________________
Whitebox-users mailing list
Whitebox-users@beau.org
http://beau.org/mailman/listinfo/whitebox-users