[WBEL-users] 3ware in 64bits pci slot

[Bastiaan van der Put]

mobo is : Tomcat i7210 (S5112),

I tried changing some bios settings, though doesn't help for the driver,

the card itself works in both slots.

Bas
At 15:08 2/2/2005, you wrote:
>I have two boxes running with these cards in the 64bit slot/dual xeon
>running the whitebox kernel with no issues.
>
>I would check your motherboard settings.
>Specifically your 33mhz or 66mhz setting.
>Some of the 8000 series are 33, some 66 depending on the model.
>
>regards,
>-dan
>
>
>-----Original Message-----
>From: whitebox-users-bounces at beau.org
>[mailto:whitebox-users-bounces at beau.org] On Behalf Of Bastiaan van der Put
>Sent: February 1, 2005 3:19 PM
>To: whitebox-users at beau.org
>Subject: [WBEL-users] 3ware in 64bits pci slot
>
>Hi,
>
>I am trying to install whitebox on a p4 with 3ware 8xxx, putting the card in
>32 bits pci slot the driver works fine.
>
>When i place the card in 64bits pci the driver fails to load/hangs at
>install time.
>
>Anyone any ideas? riser card is 64 bits one.
>
>Regards,
>
>Bas
>
>_______________________________________________
>Whitebox-users mailing list
>Whitebox-users at beau.org
>http://beau.org/mailman/listinfo/whitebox-users
>
>_______________________________________________
>Whitebox-users mailing list
>Whitebox-users at beau.org
>http://beau.org/mailman/listinfo/whitebox-users