[WBEL-users] USB modem question
Jean Lee
jean.lee at free.fr
Thu Jun 2 02:38:19 CDT 2005
Jim Bodkikns (Dakotacom) wrote:
> First the - partial - contents of /proc/bus/usb/devices (I think)
>
> T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
> P: Vendor=0baf ProdID=00ec Rev= 0.01
> S: Manufacturer=U.S. Robotics
> S: Product=U.S. Robotics 56K Faxmodem USB
> S: SerialNumber=USBHCF00000006
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=150mA
> I: If#= 0 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
> E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
>
>
> I purchased a U.S. Robotics USB modem (usr5633a), which may have
> been a mistake. If I understand this, the line above that says
> Cls=ff(vend.) means that ACM cant be used and absent a driver from the
> vendor, I am screwed.
>
>
> Is this correct, or has someone used the usr5633a? (I think I'm
> screwed)
>
> Jim
>
> _______________________________________________
> Whitebox-users mailing list
> Whitebox-users at beau.org
> http://beau.org/mailman/listinfo/whitebox-users
>
>
>
Hi,
Because there is nothing really standard with USB modems, you need a
driver which is often supplied by the vendor . The problem is that most
vendor don't provide the Linux driver but only the Windows driver.
With Linux, I think it is better to buy an Ethernet modem because you
don't need any driver.
Ask your vendor, perhaps there is a third party vendor which provides
the drivers for Linux (possibly not free).
Take a look a linux-usb.org and ask in a mailing list.
Hope this helps,
Jean Lee
More information about the Whitebox-users
mailing list