[WBEL-users] Layer 3 Routing
Cameron Showalter
cameron at gwschool.com
Mon Jun 5 11:31:17 CDT 2006
Alon wrote:
> Hi All,
>
> This is not a WBEL specific question, but I thought perhaps you could
> throw some pointers on how to address this:
>
> I want to move to a new NOC that has all the bells and whistles that I
> want including a better pricing per server (if I take a full cabinet).
> However, the NOC requires me to manage my own gateway and as a
> requirement I need to have a Layer 3 Routing box.
>
> They love to offer various ready-out of the box solutions which are
> very nice and of course are very costly:
>
> Fortigate 200A is a solution they propose. This solution offers not
> just Layer 3 Routing, but also adds a Firewall, SpamChild and
> Anti-Virus and
> DDoS protection.
>
> While all the additives are great,.. except the Firewall, there is
> really no added value to my specific needs.
>
> So,. I am looking to 'build' my own Layer 3 Router with Firewall and
> it seems that Linux is the perfect suite for this device.
>
> With that said,. I'm a newbie when it all comes down to Routing and IP
> mgmt.
> Until today all my IP mgmt were basically narrowed to: Setup -->
> Network Mgmt --> set IP, DNS and Gateway values. And occionly
> add few more IPs to the server, and even that was done via DirectAdmin
> control panel.
>
> So,. I'm looking to learn a bit more about how to create my 'own Layer
> 3 Routing Gateway'.
>
> The hardware that will be used as a dedicated box is: Pentium 4
> 3.0Ghz with 2MB Cache, 1GB of RAM and 80GB SATA HD.
> I'll add 2 Gbit network PCI cards to the onboard 10/100 NIC.
> I was told this will probably be even an Overkill with regards of
> Layer 3 Routing Gateway needs.
> My regular total MRTG traffic stands at about 30MB with peeks of 70MB
> at times.
>
> I do want to have the active firewall present with packet stateful
> inspection and whatever I throw in to better protect my network.
>
> But other than that,. I don't have any more demands.
>
> Can you suggest of a ready made solution or give me pointers of how to
> approach this?
>
> For firewall solutions I was told about: http://ipcop.org Has
> anyone had experience with this?
>
> Thanks,
>
> -Alon.
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Whitebox-users mailing list
> Whitebox-users at beau.org
> http://beau.org/mailman/listinfo/whitebox-users
>
I'll suggest m0n0wall. it has some features that you won't need, but is
overall a solid firewall. easy to install, low system resources, and
great hardware support.
http://www.m0n0.ch/wall/
More information about the Whitebox-users
mailing list