[WBEL-users] Whitebox + Oracle 10g works

[rs@swift-technologies.net]

I hope I'm not getting to far off subject for this users/news group.  I'm
having difficulty running my Oracle 10g setup disk.  I followed the
instructions Puschitz has provided and I made note of the suggestions
Michael Squires listed.  My guess, is that this problem I'm experiencing
is related to #2. in Michael's message.  I was wondering if any of you
have suggestions to fixing this problem.  Thanks in advance.

Error message example:



Xlib: connection to "192.168.2.105:0.0" refused by server
Xlib: No protocol specified

Can't connect to X11 window server using '192.168.2.105:0.0' as the value
of the DISPLAY variable.
192.168.2.105:0.0
192.168.2.105:0.0
Unable to start an interactive install session because of the following
error:Can't connect to X11 window server using '192.168.2.105:0.0' as the
value of the DISPLAY variable. The DISPLAY environment variable should be
set to <hostname or IP address>:<screen>, where the <screen> is usually
'0.0'.
Depending on the Unix Shell, you can use one of the following commands as
examples to set the DISPLAY environment variable:
- For csh:                      % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:         $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
        echo $SHELL
Use the following command to view the current DISPLAY environment variable
setting:
        echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or
xconsole as the user that started the session and type the following
command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11
based program that comes with the native operating system such as
'xclock':
        % <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X
Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'