[WBEL-users] Help with an ST tape streamer please
Conor Wynne
weeboy@conorwynne.com
Tue, 14 Sep 2004 11:51:18 +0100 (IST)
> mt -f /dev/st0 status (verify this is the correct device)
>
> SCSI 2 tape drive:
> File number=-1, block number=-1, partition=0.
> Tape block size 0 bytes. Density code 0x0 (default).
> Soft error count since last status=0
> General status bits on (10000):
> IM_REP_EN
So its the correct device then.
> mt -f /dev/st0 erase
>
> dev/st0: Input/output error
> mt: The device is offline (not powered on, no tape ?).
Try loading the tape with:
mt -f /dev/st0 load
Its not a library by any chance? If so, then you need to use "mtx" instead
of "mt-st"
Gotta get back to work now lads, later. :)
Conor Wynne
Dublin
Irlande.