[WBEL-users] Tape System and yum

Wed, 22 Sep 2004 17:47:54 +1000

--=-99pVq3PAuOMp51oT+b1Q
Content-Type: text/plain
Content-Transfer-Encoding: 7bit

Hi all
    I have 2 things that i'm not 100% sure how to fix 

1st one is this my yum log are showing up with this now 

look at the update server popt-1.8.2-10 so why is yum not updating this
? do i have to force install the update ???

/etc/cron.daily/yum.cron:

Unable to satisfy dependencies
Package rpm needs popt = 1.8.1, this is not available.
Package rpm needs popt = 1.8.1, this is not available.

 2nd
    move my old 7.3 Main File Server (MFS) to a new backup system all
ways worked

not sure why but now i can't get it going 

error i'm get now is ( it did work till i reboot once )  

I have seen some post about this but not sure how it was fixed ....

> [root@mfs root]# mt -f /dev/st0 status
> /dev/st0: No such device or address

cat 

> [root@mfs root]# cat /proc/scsi/scsi
> Attached devices: none

doing a lsmod i at see the scsi files are loaded .... 

> [root@mfs root]# lsmod
> Module                  Size  Used by    Not tainted
> sg                     35468   0  (autoclean)
> st                     30436   0  (autoclean)
> scsi_mod              103144   2  [sg st]

doing a pci list 

> 
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8361 [KLE133] Host Bridge
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8361 [KLE133] AGP Bridge
> 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
> 00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> 00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
> 00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
> 00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
> 00:08.0 SCSI storage controller: Advanced System Products, Inc ABP940-U / ABP960-U (rev 03)
> 00:0a.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0649 (rev 02)
> 00:0f.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
> 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1

so not 100% why this is not work i have set up 5 box with backup system,
3 are ok 2 are show this error 
i sure the is not a WB error but not sure what to do ....

Without a home the journey is endless

Michael Falzon (RHCT) 
Mozy's Swamp BBs & Red Dwarf BBs
http://mozysswamp.org
Registered LFS User   #406
Registered Linux User #204397

--=-99pVq3PAuOMp51oT+b1Q
Content-Type: text/html; charset=utf-8

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
 <META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
 <META NAME="GENERATOR" CONTENT="GtkHTML/3.0.9">
</HEAD>
<BODY>
Hi all 
&nbsp;&nbsp;&nbsp; I have 2 things that i'm not 100% sure how to fix 
 
1st one is this my yum log are showing up with this now 
 
look at the update server popt-1.8.2-10 so why is yum not updating this ? do i have to force install the update ??? 
 
<TABLE CELLSPACING="0" CELLPADDING="10" WIDTH="100%">
<TR>
<TD>
<TT>/etc/cron.daily/yum.cron: 
 
Unable to satisfy dependencies 
Package rpm needs popt = 1.8.1, this is not available. 
Package rpm needs popt = 1.8.1, this is not available.</TT>
</TD>
</TR>
</TABLE>
 
 
 2nd 
&nbsp;&nbsp;&nbsp; move my old 7.3 Main File Server (MFS) to a new backup system all ways worked 
 
not sure why but now i can't get it going 
 
error i'm get now is ( it did work till i reboot once )&nbsp; 
 
I have seen some post about this but not sure how it was fixed .... 
 
<BLOCKQUOTE TYPE=CITE>
<PRE>[root@mfs root]# mt -f /dev/st0 status
/dev/st0: No such device or address</PRE>
</BLOCKQUOTE>
<PRE>
cat 
</PRE>
<BLOCKQUOTE TYPE=CITE>
<PRE>[root@mfs root]# cat /proc/scsi/scsi
Attached devices: none</PRE>
</BLOCKQUOTE>
<PRE>
</PRE>
doing a lsmod i at see the scsi files are loaded .... 
 
<BLOCKQUOTE TYPE=CITE>
<PRE>[root@mfs root]# lsmod
Module Size Used by Not tainted
sg 35468 0 (autoclean)
st 30436 0 (autoclean)
scsi_mod 103144 2 [sg st]</PRE>
</BLOCKQUOTE>
<PRE></PRE>
doing a pci list 
<BLOCKQUOTE TYPE=CITE>
<PRE>
00:00.0 Host bridge: VIA Technologies, Inc. VT8361 [KLE133] Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8361 [KLE133] AGP Bridge
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:08.0 SCSI storage controller: Advanced System Products, Inc ABP940-U / ABP960-U (rev 03)
00:0a.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0649 (rev 02)
00:0f.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i1</PRE>
</BLOCKQUOTE>
<PRE></PRE>
 
so not 100% why this is not work i have set up 5 box with backup system, 3 are ok 2 are show this error 
i sure the is not a WB error but not sure what to do .... 
<TABLE CELLSPACING="0" CELLPADDING="0" WIDTH="100%">
<TR>
<TD>
<TT> 
 
Without a home the journey is endless</TT> 
 
<PRE>Michael Falzon (RHCT) 
Mozy's Swamp BBs &amp; Red Dwarf BBs
http://mozysswamp.org
Registered LFS User #406
Registered Linux User #204397</PRE>
</TD>
</TR>
</TABLE>

</BODY>
</HTML>

--=-99pVq3PAuOMp51oT+b1Q--