[WBEL-users] USB modem question
Jim Bodkikns (Dakotacom)
JimBodkins at yahoo.com
Wed Jun 1 22:59:32 CDT 2005
First the - partial - contents of /proc/bus/usb/devices (I think)
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0baf ProdID=00ec Rev= 0.01
S: Manufacturer=U.S. Robotics
S: Product=U.S. Robotics 56K Faxmodem USB
S: SerialNumber=USBHCF00000006
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=150mA
I: If#= 0 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I purchased a U.S. Robotics USB modem (usr5633a), which may have been a
mistake. If I understand this, the line above that says Cls=ff(vend.) means
that ACM cant be used and absent a driver from the vendor, I am screwed.
Is this correct, or has someone used the usr5633a? (I think I'm screwed)
Jim
More information about the Whitebox-users
mailing list