[WBEL-users] Hot plug timeout
fernando.apesteguia at gmail.com
Sat May 28 12:56:39 CDT 2005
I'm using WBEL 4 kernel 2.6.9-5 for x86_64 and that rpms from
atrpm.net don't match my kernel. I'm not sure why this release of
White Box don't use the same kernel than RHEL 4....
Actually I have driver and firmware installed and I can see my intel
pro wireless in the network device control application.
---------- Forwarded message ----------
From: whitebox at 911networks.com <whitebox at 911networks.com>
Date: May 28, 2005 7:09 PM
Subject: Re: [WBEL-users] Hot plug timeout
To: Fernando Apesteguía <fernando.apesteguia at gmail.com>
Cc: whitebox-users at beau.org
Hi Fernando Apesteguía ,
Saturday, May 28, 2005, 9:30:20 AM, you wrote:
> Hi, whitebox users.
> I'm using WBEL 4 on my laptop and I'm trying to configure my Intel Pro
> Wireless 2200 card. I have installed firmware and the original WBEL
> ipw2200 driver. But when I try
> modprobe ipw2200 and see /var/log/messages, there are these messages:
atrpms.net has done the RPM needed
This one has to match your kernel
Reboot & don't forget to soft-enable the wireless card according
to the BIOS settings: Fn-F2 on Dell.
When the network has to work
More information about the Whitebox-users