[WBEL-devel] configuring static routes?
donavan nelson
donavan@4wx.net
Mon, 24 Nov 2003 15:06:46 -0600
Thanks for all the help and suggestions. I used redhat-config-network, the
problem was seeing the BIG edit button on the startup page. Not a very
intuitive place to hide stuff IMHO.
I don't know if it all works because I deactiviated the interface from a
remote site :D
--
Donavan Nelson
4wx Networks
www.4wx.net
---------- Original Message -----------
From: Pete Cervasio <pcervasio@onairusa.com>
To: "whitebox-devel" <whitebox-devel@beau.org>
Sent: Mon, 24 Nov 2003 14:38:06 -0600
Subject: Re: [WBEL-devel] configuring static routes?
> On Monday 24 November 2003 13:50, donavan nelson wrote:
> > Is anyone out there using static routes? If so, what WBEL tool are you
> > using to configure the routes? I can't really find any information for
> > RHEL either.
>
> The old way was to use /etc/sysconfig/static-routes (which was read
> by the network rc script). I have a RH 7.3 box sitting next to me,
> which uses that file. An example is:
>
> eth0 net 192.168.1.0 netmask 255.255.255.0 gw 192.168.10.22 mss 768
>
> Unfortunately, RedHat changed how it works in 8.0 (and later). I
> found a web site that has some little bit of info on it. I used the
> part that shows how to get the 7.3 static-routes file working in the
> later releases. :)
>
> http://www.akadia.com/services/redhat_static_routes.html
>
> I hope this helps,
> Pete C.
>
> --
> =====================================================================
> On Air Digital USA http://www.onairusa.com
> Dallas, Texas a division of Smarts Broadcast Systems
>
> Don't use a big word where a diminutive one will suffice
> =====================================================================
>
> _______________________________________________
> Whitebox-devel mailing list
> Whitebox-devel@beau.org
> http://beau.org/mailman/listinfo/whitebox-devel
------- End of Original Message -------